I took WestonWocket out for another flight with the scouts tonight. First flight was pretty much the same as the 2nd flight last Monday. I filled the rocket about 1/3rd with water and pressurised to 75psi.
I had tightened the wing nuts on the launcher during the week and this seemed to hold the rocket much better, but a new launcher is still definitely needed.
The parachute was already packed and the trigger pin primed, a flick of the switch armed the circuit. The rocket achieved a similar height to the first launch on Monday which brings me to believe that the pressure is more important than the fill level, but further experiments will confirm this. The flight itself was went well with the parachute deploying in time. This was also the first flight I recorded a video of.
You can see that the parachute only opens once the rocket is upside down. The advantage to this over a timer is that if something goes wrong during the flight and it is shorter than anticipated the parachute will still deploy. Disadvantage as can be seen is that a lot of descent time is lost as the rocket rotates.
For the second launch the rocket was pressurised to 95psi, the rocket didn’t show any sign of leakage, so it should be good for 100psi. With the extra pressure the rocket really shot off fast and kept on going easily obtaining more than 200ft I would guess. The rocket tipped over at apogee and parachute deployed, filled with air and then opened. Then disaster struck! The rocket after a brief jolt kept on going down followed by a thud.
After running to the crash site, it was clear what had happened. The elastic bands used as a shock absorber had been stretched too far and broken. Luckily we were still flying the rocket with the sponge crumple zone nose cone, this took a lot of the impact. The only damage sustained by the rocket was fairly minimal. The cardboard housing that holds the circuit, batteries and servo had buckled and jumped over the retaining screws. Also the trigger pin was no longer attached to the servo, who knows where that is now. Apart from those small things, which should take no more than 15 minutes to repair, no other damage was sustained, however the parachute, which was left floating around 150ft up in the sky got tangled in a tree 🙁 So maybe it was luck that the rocket crashed instead of it getting caught as well???
Lessons Learnt
- Shock cord needs more elastic bands and a emergency bit of string should they break
- Rocket is probably capable of holding 100psi, although I was nervous pumping it with only 1/2 meter of hose.
- Foam nose cone helps absorb a lot of the impact during a crash.
- The battery retainer kept the batteries in the holder during the crash, worth the hassle
Actions
- Fix the rocket
- Get a longer pressure hose or extension
- Make a new parachute with a stronger shock absorber with an emergency string